China Superior Manufacturer Supply Belt Sintering Machine For Smelting Plant High Quality Sintering Machine

Product Description

China Superior Manufacturer Supply Belt Sintering Machine For Smelting Plant High Quality Sintering Machine

Belt sintering machine produced by our company is used for the production of sinter for iron making. With high production capacity, high degree of automation, high labor productivity, energy saving,environmental protection and so on.

Belt sintering machine is widely used in the metallurgical industry and the steel industry.

Principle

Motor, reducer and the flexible transmission drive the head of the star wheel toggle the trolley to run on the track to the discharging end. 

Lay raw material on the trolley of the sintering equipment. Igniting sintering from top to bottom, it starts venting at sintering machine below. Heated to a certain temperature material began to have a mutual reaction, and sintered as ore formation. 

Advantage

1.The belt sintering machine designed and manufactured by our company is in the absorption of domestic and foreign advanced experience. 

2.The products mainly use flexible transmission device, smooth and reliable operation, installation easily, maintain easily. 3.The head and tail of machine seal use heavy hammer connecting rod seal. 

3.Trolley side seal selected trolley skateboard new spring-type seal device, so it has good sealing performance. 

4. According to your needs, it can be designed and manufactured different specifications of the type of belt sintering machine.

FAQ

Q1. What is sintering machine used for?
A2.  It is used for the production of sinter for iron making.

Q2.Where is your company, factory or trader?
A2.We are Integration of industry and trade which is located in Liaoning Province. China.

Q3.What's the quality of your products?
A3.Our company views product’s quality as the dynamic for developing all the main parts are wear-resistant material and manufactured by advanced technology. All machines made by us are durable and high-qualified.

Q4.How about your service?
A4.We have pre-sales service and after-sales service. 
Our engineers are very experienced and can provide technology support on the phone or on the Internet.
The engineer can also provide the necessary training services as well as the daily maintenance.

For Active Lime Processing Plant Manufacturer Economical Vertical Preheater

Description

For Active Lime Processing Plant Manufacturer Economical Vertical Preheater

Preheater is polygonal vertical structure, and composed of the top bin, feeding tube, heater body, hydraulic pushing device, transfer chute, etc. The top material bin is equipped with a material level controller to control the material layer height; limestone move into the vertical preheater through sliding tube between top bin and preheater body and have the effect of sealing to prevent the cold air into thepreheater for active lime processing plant. 

Principle

After the limestone enter the preheater, about 1100℃ high temperature waste gas discharged from sintering kiln flow into the preheater moving towards the opposite direction. By the sufficient heat exchange, the materials can be uniform preheating. The temperature of limestone after preheated can reach 900℃, about 30% of the limestone will be decomposed. The temperature of discharged gas is less than 220℃, which shorten the time of sintering and lower the heat consumption and fuel cost, and effectively reduce the production cost. After preheating, limestone is pushed into the kiln by hydraulic push rod, the waste gas after heat exchange, will be discharged into atmosphere after processing by the dust collector. The advantages of the vertical preheater are good preheating performance, fewer moving parts and reliable operation.

Advantage

1.Easy to start.

2.Reduce engine wear.

3.Environmental protection.

FAQ

Q1.Where is your company, factory or trader?

A1.We are Integration of industry and trade which is located in Liaoning Province. China.

Q2. Does your company work on OEM?
A2. Yes, we have a professional design and technical team to do the customization.

Q3.How about your service?
A3.We have pre-sales service and after-sales service. 
Our engineers are very experienced and can provide technology support on the phone or on the Internet.
The engineer can also provide the necessary training services as well as the daily maintenance.

ISO9001 Approved Professional Supply Industry Activated Carbon Or Limestone Rotary Kiln

Description

ISO9001 Approved Professional Supply Industry Activated Carbon Or Limestone Rotary Kiln

According to the different materials processing, rotary kiln can be divided into cement kiln, metallurgy chemical kiln, lime kiln, ceramic kiln, zinc oxide kiln.

1. Activated carbon rotary kiln is mainly used to calcine cement clinker, and it is divided into two kinds: dry process cement kiln and wet process cement kiln. Metallurgy chemical kiln is mainly used for poor iron ore magnetizing roasting in steel factory.

2. Oxidation roasting of chromium and nickel ore. It is also used for extracting of tin and lead by chlorination volatilization roasting, for refractory plant roasting high alumina bauxite and aluminum plant roasting clinker, aluminum hydroxide and for chemical plants roasting chrome ore and chrome ore powder.

3. Lime rotary kiln is used for roasting acive lime and light burned dolomite used in iron and steel plant, ferroalloy plant and calcium carbide plant.

4. Ceramic kiln is used for calcination and manufacture of various ceramic of materials bauxite, clay, yellow mud, river sludge, fly ash, shale, coal gangue, municipal solid waste, biological sludge.

5. The Zinc Oxide kiln is used for mixing the zinc charge and the coking coal in proportion to produce Zinc Oxide

Principle

The raw material enter into the cylinder body from the tail of the kiln to be calcined at high temperature. Due to the tilting kiln body and the slow rotation, the material produces a complex movement which moves along the circumferential direction and moves along the axial direction from the high end to the low end. 

Suitable materials

The raw materials are decomposed, sintered and cooled down in the rotary kiln then clinker discharged from low-end into cooling machine. The fuel is sprayed from the kiln head, the combustion is carried out in the kiln to heat the raw material into clinker. The hot air produced in the process of heat exchange with the material enter into the kiln tail system from the kiln feed and finally it is discharged into the atmosphere.

Advantage

1. Adopting new heat insulation material to reduce heat loss.

2. At the end of the kiln head, a new type of compound scale is used to make the air leakage coefficient less than 10%, at the same time to meet the environmental protection requirements.

3. Lime kiln is usually made up of a larger diameter and shorter kiln body, which is supported by two gears. 

Therefore, it not only reduces the amplitude of the upper and the lower range of the kiln body and prolongs the cycle of the inner ring of the kiln but also reduces the transmission power and reduces the energy consumption.

FAQ

Q1. How to classify rotary kilns?
A1. According to the different materials processing, rotary kiln can be divided into cement kiln, metallurgy chemical kiln, lime kiln, ceramic kiln, zinc oxide kiln.

Q2.Where is your company, factory or trader?
A2.We are Integration of industry and trade which is located in Liaoning Province. China.

Q3. Does your company work on OEM?
A3. Yes, we have a professional design and technical team to do the customization.

Q4.How about your service?
A4.We have pre-sales service and after-sales service. 
Our engineers are very experienced and can provide technology support on the phone or on the Internet.
The engineer can also provide the necessary training services as well as the daily maintenance.

Hot Selling Centrifugal Cyclone Dust Collector Industrial Cyclone Dust Collector

Description

Hot Selling Centrifugal Cyclone Dust Collector Industrial Cyclone Dust Collector

The cyclone dust collector is the most effective way to process dust smoke air at present time. High pressure air is used to blow off the dust sticking on bag surface. The pulse controller of dust collector cyclone will control the blow-off time and interval. The working theory is: the pulse controller on top of dust collector will blow the bags in regular time, preset the pulse length and interval. The action of electromagnetic valve is controlled by pulse controller. The order of electromagnetic valve action is from left to right side.

The centrifugal cyclone dust collector is widely used for steel, food, refractory material, abrasives, mineral, chemical industry.

Principle

Industrial cyclone dust collector operating principle is following, turn down the speed of air flow suddenly and change the direction of air flow, under the gravity and inertia force the larger particles separate with air and drop to the cone bottom of the collector. 

This device is fitted for collecting large particle. There is intercepter valve on the top of cyclone collector, electric hoist starts working, it matches with dust expelling device on the bottom of cyclone collector. The procedure for dust dropping is that exhaust gas enter into the gravity setting device from horizontal direction, under gravity force, dust would be sedimentation, and the clean air would be flow through horizontal direction, and realize the dust collecting. 

Advantage

1. High efficiency, 99.9% fine dust can be filtered.

2.Save space.Compare with the bag dust collector, one filter can replace 7-9 bags, it has large filter area.

3 .The filter can use for longer time, the material of filter is polyester fiber, besides, a dust board is installed the dust entrance,so that the dust can’t impact filter directly.

4.Convenient operation and maintenance, the pressure loss of medium, small power consumption, operation, maintenance costs are low.

5. There are wheels on the bottom of the dust collector, can move everywhere freely.

6.The surface of box is stoving varnish, looks very nice.

FAQ

Q1.How  many  days  do  you  need  to  produce  this  cyclone  dust  collector ?

A1.This is specially designed machine according to your specific requirement.From engineer  designing to production completion , it needs about 45 to 60 days.

Q2.Where is your company, factory or trader?
A2.We are Integration of industry and trade which is located in Liaoning Province. China.

Q3.What's the quality of your products?
A3.Our company views product’s quality as the dynamic for developing all the main parts are wear-resistant material and manufactured by advanced technology. All machines made by us are durable and high-qualified.

Q4.How about your service?
A4.We have pre-sales service and after-sales service. 
Our engineers are very experienced and can provide technology support on the phone or on the Internet.
The engineer can also provide the necessary training services as well as the daily maintenance.

ISO Approved Filter Low Pressure Long Bag Dust Collector

Description

High Quality Long Bag Filter Low Pressure Pulse Type Dust Collector Machine With Competitive price

Dust Collector  is a new product concentrate the advantages of gas box pulse dust collector and long bag pulse long bag filter. It is widely used in dust control and materials recovery in metallurgical industry, building materials industry, power industry, chemical industry, carbon black asphalt concrete mixing, boilers, flue gas dust or any other industries.

low pressure long bag pulse dust collector
Model	LCM420-2x6	LCM462-2x4	LCM462-2x5	LCM462-2x6	LCM462-2x7	LCM462-2x8
Air volume （m³/h）	240000-302400	170000-221700	220000-277000	266000-332000	310000-388000	350000-443500
Filter area （m³）	5040	3696	4620	5544	6468	7392
Number of bags	1680	1232	1540	1848	2156	2464
filtration velocity： （m/min）	0.8-1.0
Equipment resistance （pa）	1500
Cleaning pressure （Mpa）	0.2-0.4
Air consumption （m³/min）	5
Filter bag specifications （mm）	Φ160x6000
Weight（t）	115	176.5	142	171	199	237.8

Principle

Dust air enters each dust hopper from the inlet distributor, after induced and the diversion by distributor, big size particles of dust are separated directly into the ash bucket, and the small and fine dust fly into the filter chamber uniformly, and would be absorbed on the outside surface of the filter bag, dust into the filter chamber and adsorption in the filter bag. 

Then the clean gas through the filter bag enters into the air cleaning room, flying into the atmosphere through the air-exhausting pipe and off-line valve.

Advantages

1. Adapt pulse blowing dust cleaning technology.

2. Long working service life and good reliability.

3. Lower resistance.

4. Good sealing.

5. Can replace the bag during working.

6. Perfect control system.

FAQ

Q1. How about your company?
A1.Our company has more than 20 years experience. We have our own manufacture and many professional technicians.

Q2. How about the test and installment?
A2.We will assign the engineers.

Q3. How long is the after-sales service?
A3.The after-sales service will be life-long.

Q4. Do you supply the spare-parts?
A4.The spare-parts is free in warranty.

Q5. What’s the payment method?
A5We accept T/T, L/C and Western Union.

Q6. How to delivery the goods?
A6.We will deliver it by ocean transport.