High Efficiency Energy Saving Sinter Plant And Pellet Plant Use Drum Or Cylinder Mixer
The cylinder mix machine is one of the mainly equipment in sintering production. The main purpose is to form a loose particle material by mixing the sintering raw material powder ore, concentrate, fuel and solvent in proportion. Widely used in metallurgical steel industry, the drum mixer is simple structure , reliable operation and high efficient in mixing granulation and pelletizing.
Principle
When the material into the cylinder and driven by rotation, with the role of centrifugal force, the material is forced to a certain height.
When gravity exceeds the centrifugal, the material falls down the waterfall. For the tilt cylinder and the rolling direction of the batch is at an angle to rotative surface, the batch is gradually moved toward the discharge end in the direction of the cylinder axis.
As this repeated cycle, track of batch can be drawn into a spiral curve.The material is wetted by water supply pipe. So repeat a certain time, the material is constantly mixed, and rolled into a certain strength and size of the ball.
Characters
In order to prevent wear in cylinder and improve mixer,all set wear-resistant rubber lining and shovelling plate.
Using the overall idler roller base and the dispersion of the transmission part of the base.
As adapting rubber liner material is rare earth oil nylon, the advantage is not sticky material, improving the mixing effect.
Using the overall idler roller base and the dispersion of the transmission part of the base. So as to easy to install and adjust and ensure the installation accuracy, a pair of roller base is for a whole.
The transmission base is separating as simple structure, light weight, easy to manufacture and install and adjust.
Using the overall idler roller base and the dispersion of the transmission part of the base. So as to easy to install and adjust and ensure the installation accuracy, a pair of roller base is for a whole.
The transmission base is separating as simple structure, light weight, easy to manufacture and install and adjust.
Maintenance
1.Replace lubricant with the rules.
2.Inspect oiliness regularly and pay attention to lubricant oil mass. As it is badly off, add it at any times.
3.Take care of head stock’s temperature rang at any time.
4.Pay attention to any abnormal vibration and noise in working.
5.Always inspect wear of scale board, replace it timely.
6.Whether in well sealed.
7.Pay attention to connection of bolt, tighten it regularly.
8.Daily maintenance of motor and speed reducer is based on respective document.
FAQ
Q1. What is the angle of mixer?
A1.The general spiral angle is 15°-20°.
Q2. What is the application of the mixer?
A2.It is to form a loose particle material by mixing the sintering raw material powder ore, concentrate, fuel and solvent in proportion.
Q3. Where is your company, factory or trader?
A3.We are Integration of industry and trade which is located in Liaoning Province. China.
Q4. What's the quality of your products?
A4. Our company views product’s quality as the dynamic for developing all the main parts are wear-resistant material and manufactured by advanced technology. All machines made by us are durable and high-qualified.
Q5. How about your service?
A5.We have pre-sales service and after-sales service.
Our engineers are very experienced and can provide technology support on the phone or on the Internet.
The engineer can also provide the necessary training services as well as the daily maintenance.
A1.The general spiral angle is 15°-20°.
Q2. What is the application of the mixer?
A2.It is to form a loose particle material by mixing the sintering raw material powder ore, concentrate, fuel and solvent in proportion.
Q3. Where is your company, factory or trader?
A3.We are Integration of industry and trade which is located in Liaoning Province. China.
Q4. What's the quality of your products?
A4. Our company views product’s quality as the dynamic for developing all the main parts are wear-resistant material and manufactured by advanced technology. All machines made by us are durable and high-qualified.
Q5. How about your service?
A5.We have pre-sales service and after-sales service.
Our engineers are very experienced and can provide technology support on the phone or on the Internet.
The engineer can also provide the necessary training services as well as the daily maintenance.
没有评论:
发表评论